Emersen Consle or Buffet

Yodel Lay He Ho!
Happy Knocktoberfest 2013!!!!
Have you been enjoying all the knock-off goodness this week shared by the dozens of amazing bloggers who are part of Knocktoberfest 2013?
I sure have!!!

This week long party is in full swing, and I'm pretty excited to jump in and share my Knocktoberfest 2013 project with you!
You know we've got a wee one on the way, right? Well, I've been in search of the perfect changing table to build for our new baby, something that fits in a rustic yet refined room, can be used beyond diapering, and has tons of storage.
Our family agreed that this West Elm Emmerson buffet or console would make the perfect changing table/storage solution for our new baby's room. It's the right height, the right amount of open and concealed storage, the right mix of modern and rustic ... everything is right ....

Everything except the price - $1100!!! ($999 plus $100 shipping surcharge).
And PS - they don't ship to Alaska.
What's a excited expectant mom to do???

Well, bust the power tools out and DIY it, of course.
Our whole family helped out on this console for our new baby. The hubs helped me with construction (being 32 weeks along, any help is gladly accepted and appreciated), and my sister applied the beautiful stained finish.

All for under $100!!!
That's right - the main box of this console is simply one sheet of 3/4" plywood (I used PureBond Formaldehyde Free because it's non-toxic and American made and it's pretty)

That was ripped into easy to manage, transport and cut strips. If you don't have a table saw, ask your home improvement store to rip the plywood for you. It'll be much easier to work with in pre-ripped strips.
Just make sure they rip it so the strips are all exactly equal in width.

The doors are just cheapo white pine boards (pallet boards would have been lovely too!).
Here's a breakdown of my costs:
1 sheet 3/4" PureBond Plywood - $50
2 - 10' long 1x4 whitewood boards (used furring strips) - $8
3 - 8' long 1x2 whitewood boards (used furring strips) - $3
1 - sheet 1/4" plywood or backerboard - $20
1 - 1x6 @ 6 feet long - $5
1 - 1x3 @ 3 feet long - had scrap leftover already but these run about $1.50 for 8 feet
2 - sets of butt hinges - $4
2 knobs - $5
Had lefttover screws and nails and glue from other projects
Right at $95!!!!
Happy Knocktoberfest indeed!!!
I'll raise my mug and chicken dance to that!

And of course, we'll be building a topper too!!! Stay tuned for that coming soon!
I'm sharing below the step-by-step tutorial so you can also make this buffet cabinet or console or changing table - whatever you are going to use it as - but the party is far from over!!!
Next up - Marianne from Songbird blog is sharing her Knoctoberfest project! Check it out!!!
And of course, the plans follow.
Enjoy!
XO Ana
Shopping List: 
1 sheet 3/4" plywood ripped into strips 15 3/4" wide
3 - 1x2 @ 8 feet long
1 sheet 1/4" plywood or backerboard
1 - 1x6 @ 6 feet long
1 - 1x3 @ 3 feet long
2 - 1x4 @ 10 feet long
2 sets of butt hinges
magentic clasp or hasp (recommended)
2 knobs
edge banding or 1x1 pine trim for finishing small shelf exposed plywood edges (I used pieces of 1x2 ripped in half)
Tools: 
measuring tape
square
pencil
safety glasses
hearing protection
General Instructions: 
Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!
Dimensions: 
Dimensions shown above
Cut List: 
BOX
2 - 3/4" plywood @ 15 3/4" x 55 1/2" (top and bottom)
1 - 3/4" plywood @ 15 3/4" x 36 1/4" (main shelf - cut to fit)
3 - 3/4" plywood @ 15 3/4" x 25 1/2" (sides/dividers)
2 - 3/4" plywood @ 15 3/4" x 17" (small shelves - cut to fit)
1 - 1/4" plywood @ 55 1/2" x 27"
FACE FRAME
2 - 1x2 @ 55 1/2"
3 - 1x2 @ 24"
BASE
2 - 1x6 @ 15 3/4"
1 - 1x6 @ 34"
1 - 1x3 @ 34"
DOORS
4 - 1x2 @ 17 1/2" (both ends beveled at 45 degrees off square, long point to long point)
5 - 1x4 @ 23 3/4"
TIP: Make sure you plan so all the plywood cuts fit on the same sheet of plywood. There's just enough - not alot of extra!
Step 1: 
NOTE on getting doors to fit perfectly: So here's the deal - wood isn't always true to widths. Measure your 1x4 boards that you will use for the doors. If they measure 3 1/2' wide, then you can just proceed. If they don't, I recommend modifiying the main opening width to the width of your finished doors + 1/2" for clearance around doors + 1-1/2" for the face framing. You could also build your doors first (see step 6) and then measure the finished door, add 1/2", add another 1 1/2" for the face framing, and this will be the main opening width. Another option is if your 1x4 boards are a little on the narrow side, you could leave gaps between the 1x4s as you build the doors. If the 1x4 boards are too wide (not likely) you could build the door and then trim it down to fit. A final option is to just go ahead and build the box, but hold off on the middle 1x2 in the face frame (next step) until after you build the doors. Then attach the middle 1x2 in the face frame to give you just enough room for your doors. Just giving you options so your doors look beautiful when done with an even gap around them!
So once you get that figured out, it's time to build the box. We use 3/4" pocket holes (3 per end of each of the sides and divider) and 1-1/4" pocket hole screws. Another option is 2" wood screws or nails and glue (nails aren't as strong but since this project is face framed with a full back and isn't for sitting or climbing on, would most likely be enough).
The main shelf can be added at this step too.
Step 2 Instructions: 
If you altered the width of your main opening, this will affect the width of your smaller shelves. Cut to fit and attach. We attached on the underside with 3/4" pocket holes and 1-1/4" pocket hole screws, but again, countersinking screws or nails would work too. Just don't forget the glue.
Step 3 Instructions: 
We built our face frame first on the ground with 3/4" pocket holes and 1-1/4" pocket hole screws, then nailed the whole thing to the front of the project.
Step 4 Instructions: 
And then we added the back, nailing and gluing it to the project.
Step 5 Instructions: 
Then we built the base, and attached it to the base of the cabinet. We used pocket holes again, but it's not entirely necessary. Another option is to throw a few 1x2s underneath, flat to the underside of the cabinet, for easy attaching base to bottom of cabinet.
Step 6 Instructions: 
Now for those doors - be careful to build them square, so the ends match up. I glued between each 1x4 and also glued and nailed the back supports on.
Step 7 Instructions: 
I attached the doors with simple butt hinges, in the crack between the door and face frame. The goal is 1/8" gap around all sides of the door.
To keep the doors shut, add magnetic clasps or hasps.
Step 8 Instructions: 
To achieve this stain, the entire cabinet was stained a medium stain. Then for the doors, selective boards were sanded down to remove some of the stain, lightening the boards. Other boards were given another layer of darker stain. And for the lighter areas, I taped off areas and sanded all the stain off to give the appearance of a past board to board joint.
Preparation Instructions: 
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth. It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Estimated Cost: 


Sumber :  ana-white.com



Tidak ada komentar:

Write a Comment


Top